Campbell Chain T7550502 Wall-Ceiling Pulley, 2

Highlights:

• Steel Body and die-cast zinc sheave
• Zinc plated to protect against rust and corrosion
• Powder metal bushing to extend pulley life and provide smooth operation
• For rope up to 3/8 or 1/2 as noted
• Working Load Limit stamped on pulley body
• For indoor or outdoor use
• Single sheave pulley
• Mount w/(3) #12-1-1/2 screws or #10 bolts w/nuts and washers
• Do not use nails to mount pulley

INSPECTION:

Regular inspections should be conducted on accessories to detect damage or deterioration from use. The accessory should be inspected for any of the below conditions. If present. the accessory should immediately be removed from service

• Cracks
• Excessive nicks or gouges
• Excessive wear. The accessory should be removed from service if any dimension is worn more than 10% from the original dimension
• Stretched. bent. twisted. or distorted parts
• Excessive corrosion
• Evidence of heat damage
• Evidence of field welding
• Any other condition which questions the integrity of the accessory