Yonico Top and Bottom Bearing Flush Trim 2-1/2 in. L 1/2 in. Shank Carbide Tipped Router Bit

This top and bottom bearing flush trim bit has a 2-1/2 in. cutting length and a 3/4 in. Dia. The total length of the bit is nearly 5 in. with a 1/2 in. shank. Top and bottom bearing flush trim bits are used to trim the edges of wood stock that have sections of tricky end grain which are subject to tear out. The direction of cut will significantly effect the results. Having the option to use either the top or bottom bearing as a trim guide will give you the option to flip the work piece and either ramp or climb the woodgrain. As with all trim bits, choosing the largest diameter that will accommodate your work piece will yield the smoothest finish.

• Versatile top and bottom bearing flush trim router bit for challenging woodgrain
• Premium C3 micro-grain tungsten carbide blades for a sharper and longer lasting edge
• For use on table mount and handheld router
• Silver induction brazing for maximum strength and durability
• Includes end and shank guide bearings for template and pattern trimming
• Manufactured with anti-kickback design to help prevent workshop mishaps

Specifications

• Self-Feeding: No
• Router/planer type: Trim
• Shank Style: Straight
• Number of Pieces: 1
• Number of Flutes: 2
• Tools Product Type: Power Tool
• Bit Material: Carbide
• Individual/Set: Individual
• Product Length (in.): 0.65
• Product Height (in.): 0.65
• Shank Diameter (in.): 1/2″
• Cut Diameter: 0.00
• Product Width (in.): 0.65 in